Radial Engineering JS3 Passive Microphone Splitter Direct Box with 2 x Microphone Cable and Zorro Cloth

Radial JS3 Passive Microphone Splitter With 2 x Senor Microphone Cable and Zorro Sounds Polishing Cloth

The JS3 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak

Radial Engineering JS3 Passive Microphone Splitter Features:

Send one microphone signal to three destinations simultaneously
Jensen transformer-equipped for exceptional audio quality
Eliminates hum and buzz caused by ground loops
Dual isolated outputs provide optimal noise rejection

Using the JS3 to feed three mixers

Sometimes, you need to feed the main mixer, stage monitors and a recorder at the same time. The JS3 makes hook-up easy with XLR input, direct out and two isolated outputs. These eliminate ground loops when connecting multiple mixers at the same time.

Radial JS3 Specifications

Audio circuit type : Passive mic/line splitter, transformer based
Transformer : JT-MB-DPC, 1:1:1 ratio
Number of channels : Three-way splitter (one in/three out)
Frequency response : 20Hz ~ 20KHz (+0dB/ -2dB)
Dynamic range : 140dB
Total harmonic distortion : 0.0005% @ 1kHz
Phase Deviation : 0.7° @ 100Hz; 2.8° @ 20Hz
Input Impedance : 2.4k Ohms, unbalanced
Output Impedance : 2.4k Ohms, unbalanced
Maximum Input : +25dBu @ 1kHz
Input Connectors : XLR-F in
Output Connectors : Two isolated outputs

Features

• The Radial JS3 is a high performance balanced Passive 3-way Microphone Splitter designed to send a signal to multiple destinations simultaneously, with two transformer-isolated outputs and one direct output. INCLUDES :- 2 x Senor Microphone Cable 20' and Zorro Sounds Polishing Cloth
• Radial JS3 passive microphone splitter makes full use of the top-shelf clarity you'll only get from a Jensen transformer with a nickel-laminated core. With its extremely low harmonic distortion and freedom from phase shifts and bandwidth limitations, the only one who'll know there's a splitter in your signal chain is you
• In fact engineers have found that the JS3's greater than 90dB of noise rejection and protection from RF, DC, and ground-loop interference can seriously improve the sound of your microphones. That's a real bonus when you want to split a feed to three systems, such as a live mixer, a broadcast mixer, and a multitrack recorder
• And when it comes to live sound applications, you can trust Radial Engineering's heroic build standards, which include an I-beam-style construction from 14-gauge steel.
• What's more, you can mount multiple JS3s in your Radial J-Rak The Radial JS3 mic splitter is a passive device that employs a Jensen transformer to perform the mic bridging and as such, all technical specifications show the isolated output
• The JS-3 features a bookend design that protects the connectors and switches. Crafted from 14 gauge steel, the unit is virtually indestructible. You can also rack-mount up to eight units with an optional J-Rak from Radial Engineering It is important to note that the JS3 has been optimized for use at mic levels and each device is supplemented with MuMETAL shielding and a solid steel enclosure to ensure minimal pollution from outside magnetic interference.