MXR M87 Bass Compressor Guitar Effect Pedal Bundle with 2 Patch and 2 Instrument Cables

The MXR M87 lets you have complete command on the compression function thanks to the release, attack, ratio, output, and input controls. You get plenty of headroom with the M87 thanks to the built-in Constant Headroom Technology (CHT). For hassle-free setting up, the MXR has 10-LED gain-reduction meter as a guide. Plus, this effects pedal uses True Hardwire Bypass to keep the low end tight and clean. The MXR M87 does its job well without impacting your tone negatively.

Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls-Attack, Release, Ratio, Input, and Output-makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its CHTTM Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It's all packed into a durable, lightweight aluminum-housing pedal that's the size of a Phase 90.

MXR M87 Bass Compressor Pedal TECHNICAL SPECS:

• Bypass Mode: True Hardwire
  
• Input Impedance: 1 MOhm
  
• Output Impedance: 600 Ohm
  
• Max Input Level: +14dBV
  
• Max Output Level: +8.5dBV
  
• Frequency Response: +/-1dB, 20Hz~20kHz
  
• Noise Floor: -90BV (A-weighted)
  
• THD: Greater than 0.5%
  
• Gain: 31dB
  
• Compression Ratio: 4:1, 8:1, 12:1, 20:1
  
• Attack Time: 20 µs to 800 µs
  
• Release Time: 50 ms to 1.1 s
  
• Power Source Options: 9-volt Battery or 9V DC power supply